Shinybow USA SB-5688AK Manuel d'instructions télécharger pdf (Page 8)

FRONT PANEL- AUX

10. FUNCTION KEY - AUX (The audio additional on the “Audio / ARC” port )

The AUX FUNCTION feature allows you to replace the embedded HDMI audio signal with

an audio signal that is connected to the switchers Audio AUX Input. Using the AUX function

replaces the audio and does not mix the audio. (Default = AUX Disabled)

To Enable the AUX option on a specic Output, perform the follow steps:

- Press the AUX button.

- On the SOURCE row, Press 1 thru 8 (the button will illuminate).

- Press ENTER The new conguration will be stored. The front panel LCD display will show an “X” under the Source port

- Or press AUX again to cancel operation.

To Disable the AUX option on a specic Output, perform the follow steps:

- Press the AUX button.

- On the SOURCE row, Press 1 thru 8 (the button will illuminate).

- Press ENTER The pre-set conguration will execute. The front panel LCD display will be blank under the Output port indicating

audio source is that which is embedded on the HDMI cable.

- Or press AUX again to cancel operation.

Note :

1. Operation will abort if no keys are pressed within 5 seconds.

2. The AUX Audio input only function when a valid HDMI / DVI video signal is present. Without a video, the AUX audio will not operate.

FRONT PANEL-AUX

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Pas de commentaire

Shinybow USA SB-5688AK Manuel d'instructions Page 8