Shinybow USA SB-5688AK Manuel d'instructions télécharger pdf (Page 22)

Note :

Control the switcher

SPD : Speed

LINK : Ethernet link

RJ-45 Female 8P-8 Connector

ETHERNET SERIAL INTERFACE CONNECT A PC OR CONTROL SYSTEM VERSION COMPATIBLE V2.0

For a complete list of commands, please reference external document extended Ethernet Protocol Instruction Manual.

ETHERNET SERIAL INTERFACE

Pin Ethernet Reference

1 TXOP TX +

2 TXON TX -

3 RXIP RX +

4 NC

5 NC

6 RXIN RX -

7 NC

8 GND

ETHERNET TCP/IP PROTOCOL COMMANDS ( Ethernet / RS-232 Control driver V2.0)

*** The Ethernet port and RS-232 port cannot be used simultaneously. Any connection to the Ethernet Control port will disable

serial commands send to the RS-232 port.***

RS-232 SERIAL INTERFACE CONNECT A PC OR CONTROL SYSTEM. VERSION COMPATIBLE V2.0

For a complete list of commands, please reference external document extended RS-232 Protocol Instruction Manual.

RS-232Conguration

RS-232 cable is a straight thru cable and not null-modem

Denition Pin Pin Denition

1 1 DCD

TX 2 2 RX

RX 3 3 TX

4 4 DTR

GND 5 5 GND

6 6 DSR

7 7 RTS

8 8 CTS

9 9 RI

RS-232

RS-232 SERIAL INTERFACE PROTOCOL COMMANDS ( Ethernet / RS232 Control driver V2.0 )

The Shinybow switcher can be controlled via the RS-232 serial control port to allow for interfacing to a PC, or similar third party control

system.

The serial communication parameters are 9600 baud, 8 bit, No Parity and 1 stop bit - this is often referred to as 9600 8N1. When the unit

recognises a complete command it will perform the requested action - there is no delimiter character required.

ETHERNET & RS-232 SERIAL INTERFACE

Shinybow

Device

1 2 ... 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire

Shinybow USA SB-5688AK Manuel d'instructions Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Commutateurs vidéo Shinybow USA SB-5688AK